Make a Bungee-Twine Rattling Rig

Deer antlers tied together with a bungee cord.

A bungee twine makes the right string for a rattling-rig. Scott Bestul

Actual antlers pack extra quantity and produce a greater sound than rattle luggage, however toting a few fundamental beams is inconvenient and noisy. You’ll be able to clear up these issues by making a easy bungee-cord rig that allows you to transport the antlers quietly and comfortably. Right here’s how:

Make a Bungee Rattle-Rig

  1. Begin with antlers which have at the very least three combating tines on all sides. These will be sheds, or antlers from a harvested buck which might be reduce off on the bases. Safe one antler in a vise, and use a hacksaw, bone noticed, or reciprocating noticed to chop off the forehead tine.
  2. Reposition the antler within the vise in order that the bottom is pointing up, and use a 1/4-inch bit to drill a gap 2-1/2 inches deep into the underside of the primary beam.
  3. With the antler nonetheless within the vise, screw a 1/4×3-inch eye screw (accessible at {hardware} shops) into the outlet. Take a sturdy pair of pliers and bend the attention of the screw open barely to create a niche. Or put the attention within the vice, and bend it. Then repeat these first three steps with the opposite antler.
  4. Lay each antlers down on a bench or desk. Slide the elastic part of a 24-inch bungee twine into the hole you made within the eye of every screw. Use the vise to bend the attention closed once more.
  5. Your antlers at the moment are prepared for the sphere. Throughout bow seasons, I wish to tote them round my waist, stretching the bungee twine round my midsection like a belt. I place one antler on every hip, which retains them from banging collectively as I stroll. Once I’m in an space the place there could also be different hunters, I merely put on a protracted shirt untucked or a jacket that hides the horns. Alternatively, you need to use the bungee twine to lash the antlers to the skin of a day or fanny pack. Clearly, you need to make sure that the antlers are hidden or lined with hunter-orange throughout gun seasons. If you’re sitting in your stand, wrap the twine across the tree trunk to retailer the antlers, or use the hooks at every finish of the twine to hold your horns on a close-by department, the place they’ll be proper at your fingertips.

Source link

We will be happy to hear your thoughts

Leave a reply

Reset Password
Compare items
  • Total (0)
Shopping cart