FryOilSaver Co, Restaurant Grade Quaternary Ammonium Sanitizer Strips, Precision QAC QR5, 0-500ppm Multi Quat Strips for Food Service, 1 x Vial of 100 Strips

Price: price a - (Details)

Product Description

NOTE: FryOilSaver Co. QR5 Quat strips will NOT work with sanitizers that have Chlorine or Bleach as the active ingredient or to test the pH of water

FryOilSaver Co. QR5 quat test papers and strips utilize an effect commonly referred to as the “protein-error of indicators” to quantify the QAC ppm levels. While first observed with proteins (thus the name), the technique utilizes pH indicators and buffering systems to create an environment where the test paper or strip reacts (develops color) proportional to the amount of analyte (QAC) present. The FryOilSaver Co. quat test papers and strips have color charts calibrated to solutions prepared from OASIS 146, an industry-standard quat product. The performance of the papers and strips with alternate quat products should always be verified.

Features Tests 5 different PPM 0 ppm. 100 ppm. 200 ppm. 300 ppm. 400 ppm. IMPORTANT:

Store out of direct sunlight
Always replace the vial cap
Always wear safety equipment when working with sanitizer solutions
Keep away from children

The easiest and most efficient way to test your sanitizing solutions Get instant results!

When using the FryOilSaver Co. QR5 test strips, you can rest assured that you will not be wasting time sitting around waiting for the results. Simply dip one of the strips into the solution, remove and instantly test against the provided color chart.

How to use FryOilSaver Co. QR5 Test Paper

Remove a QAC QR5 test paper from the vial, being careful not to touch the strip anywhere other than where you grasp it with your fingertips.
Dip about 1″ of test paper into the solution to be tested for 1 second.
Allow 5-10 seconds to develop, then compare to the color chart.

Works with Steramine Quat Sanitizer!

The FryOilSaver Co. QR5 Quat test strips work extremely well with Steramine sanitizers. Steramine is an industry-leading sanitizer. Like all sanitizers, Steramine must be mixed to the correct ppm. Our FryOilSaver Co. Quat strips can help you get the perfect mix every time!

FAQs

Does temperature affect these strips?

Testing was run on set of control solutions 0 – 50 – 100 – 200 – 400 ppm Hyamine 1622 (Fluka) warmed up to temperatures in the range 35 – 60oC.

35C – reading OK in the whole concentration range
40C – reading OK in the whole concentration range
45C – 0 – 50 – 100 ppm OK, 200 and 400 ppm reading cca half color square higher
50C – 50 – 100 ppm reading cca half color square higher, 200 – 400 ppm reading 1 color square higher
55C – reading 1 color square higher in the whole range
60C – reading 1 color square higher in the whole range
Does the accuracy of the QR5 depend on the pH of the solution?

The accuracy of QAC tests strips does not depend on the pH value of solutions to be tested in the range of 1.86 – 9.2 pH, but rather it depends on buffering capacity. When the pH of a solution to be tested is a result of acidic or alkaline compounds without buffering capacity, then the accuracy of the test is not influenced.

Works with many leading Sanitizers Steramine Swisher Multi Quat Betco Quat 3M Quat Disinfectant

Designed to test sanitizing solutions in restaurant kitchens

The FryOilSaver Co. QR5 Quat strips are designed to test the ppm of Quaternary Ammonium sanitizers. This DOES NOT include bleach and chlorine sanitizers

Does NOT test pool water

These test strips will not work for testing the pH of pool water. It picks up the quat ppm content and not pH

Does NOT test tap water

These test strips will not work for testing the pH of tap water. It picks up the quat ppm content and not pH

Tests Quat Sanitizers

✓

✓

Tests Chlorine Solutions

✓

✓

Included Color Chart

✓

✓

✓

Is Discontinued By Manufacturer ‏ : ‎ No
Product Dimensions ‏ : ‎ 2.6 x 0.6 x 0.6 inches; 0.32 Ounces
Item model number ‏ : ‎ QAC QR5
Date First Available ‏ : ‎ April 27, 2020
Manufacturer ‏ : ‎ Precision Labs
ASIN ‏ : ‎ B087QR27DJ

NEW FORMULA FOR EASIER AND QUICKER TESTING – With the FryOilSaver, simply dip a strip into the solution for one second, wait for 5-10 seconds to allow development and then compare to the provided color chart
COLOR COMPARISON CHART INCLUDED – After dipping the strips in the solution, wait for 5-10 seconds to allow the color to develop and then compare to the provided color chart. The color chart helps to user to know the ppm of their solution. These strips measure 0-500ppm
MORE ACCURATE READINGS – This product is made from litmus paper to ensure more accurate testing. The strips measure 0, 150, 200, 400, and 500 parts per million, and will indicate the concentration level of your Quaternary Ammonium Compounds (QUAT) Sanitizer
MEETS FEDERAL, STATE AND LOCAL REQUIREMENTS – The FryOilSaver QAC quat strips meet the requirements on federal, state and local levels of health regulations. These regulations are to have appropriate test kits available at all times, to test and verify the strength of sanitizer solutions. This kit meets all the requirements
100 STRIPS PER VIAL – This kit contains 100 quaternary ammonium test strips for testing the concentration levels of your sanitizer solutions.